欢迎光临乐清市美格尔电子电器有限公司官方网站!

>美格尔

联系我们

  • 联系电话:

    0577-62875133

  • 传真:

    0577-62987133

  • E-mail:

    mgr@mgr.top

工业级固态继电器

当前位置:首页 > 产品总汇 > 产品中心 > 工业级固态继电器

MGR-H3100Z-3 工业级组合三相交流固态继电器 ( 基本型 )

所属:工业级固态继电器

产品介绍

◎ 型号含义 Type meaning

`image.png`/

① 长条形 Long strip

② 负载电压 30-480VAC Load voltage 30-480VAC

③ 40A, 60A, 80A,100A,120A,125A

④ 过零型 Zero-crossing type

⑤  组合三相 Three phase combined solid state relay


◎ 产品概述 Product overview

◆ 额定电流:40A-125Amps

◆ 额定电压:30-480VAC

◆ 控制电压:4-32VDC

◆ 控制电流:并联≤ 30mA,串联≤ 10mA

◆  背靠背 SCR 输出适合商业级重工业级应用,性能可靠

◆ " 超低 " 的输入电流

◆ 低输出断态漏电流

◆ 低输出通态压降

◆ 具有 LED 灯输出指示

◆ 包含标准输出的 R-C 缓冲器

◆ 配备标准形材工业散热器及轴流风机,散热效果显著

◆ 具有过热温控保护


◆ Rated current: 40A-125Amps

◆ Rated voltage: 30-480VAC

◆ Control voltage: 4-32VDC

◆ Control current: Parallel ≤30mA, Tandem ≤10mA

◆  Reverse-parallel SCR as the output component can be used in commercial or heavy industrial applications with reliable performance

◆ "Ultra low" input current

◆ Low output off-state leakage current

◆ Low output on-state voltage drop

◆ Display output status via LED

◆ Standard output R-C buffer

◆ Industrial radiators and axial fans use standard shapes and materials for excellent heat dissipation.

◆ Over-temperature protection


注意 :

1. 当负载电流为 10A 时 , 必须加装散热器 ; 为 40A 及以上时 , 必须加风扇强冷或水冷 .

2. 使用感性负载时 , 务必在输出端并接一个压敏电阻 , 取值为负载电压的 1.6-1.9 倍 .


Notice:

1. If the load current is 10A, a heat sink must be equipped;  if the load current is 40A or more, an air-cooled radiator or a water-cooled radiator must be installed.

2. When the load is an inductive load, be sure to connect a varistor in parallel with the output terminal, whose voltage value is 1.6-1.9 times the load voltage.


◎ 安装尺寸及接线图 Installation dimensions and wiring diagram

`image.png`/

注:特殊电压可定做。Note: Specific voltage can be customized.

关注微型平台

Copyright © 2020 乐清市美格尔电子电器有限公司 All Rights Reserved 版权. 浙ICP备0522718号