欢迎光临乐清市美格尔电子电器有限公司官方网站!

>美格尔

联系我们

  • 联系电话:

    0577-62875133

  • 传真:

    0577-62987133

  • E-mail:

    mgr@mgr.top

固态调压器

当前位置:首页 > 产品总汇 > 产品中心 > 固态调压器

MGR-HVR A 单相交流固态调压器 ( 基本型 )

所属:固态调压器

产品介绍

◎ 型号含义 Type meaning 

`image.png`/

① 长条形 Long strip

② 电位器 Potentiometer (470K) (680K)(820K)

③ 60A,80A,100A,120A,125A


◎ 产品概述 Product overview

◆ 额定电流:60A-125Amps

◆ 额定电压:0-480VAC

◆ " 超低 " 的输入电流

◆ 低输出断态漏电流

◆ 低输出通态压降

◆ 包含标准输出的 R-C 缓冲器

◆ 控制方式全兼容,便于计算机连网调压


◆ Rated current: 60A-125Amps

◆ Rated voltage: 0-480VAC

◆ "Ultra low" input current

◆ Low output off-state leakage current

◆ Low output on-state voltage drop

◆ Standard output R-C buffer

◆ Fully compatible with different control methods, allowing the computer to easily adjust voltage through the network


注意 :

1. 当负载电流为 10A 时 , 必须加装散热器 ; 为 40A 及以上时 , 必须加风扇强冷或水冷 .

2. 使用感性负载时 , 务必在输出端并接一个压敏电阻 , 取值为负载电压的 1.6-1.9 倍 .


Notice:

1. If the load current is 10A, a heat sink must be equipped; if the load current is 40A or more, an air-cooled radiator or a water-cooled radiator must be installed. 

2. When the load is an inductive load, be sure to connect a varistor in parallel with the output terminal, whose voltage value is 1.6-1.9 times the load voltage.


◎ 安装尺寸及接线图 Installation dimensions and wiring diagram

`image.png`/


注意:电位器端带电

Attention: Terminals of the potentiometer is charged!


关注微型平台

Copyright © 2020 乐清市美格尔电子电器有限公司 All Rights Reserved 版权. 浙ICP备0522718号